- $199
- STANDARD
- 230
- ENTRIES
BRIEF
DESIGNS (230)
- Logo Name:
- Grumpy Monkey Audio Repair
- Company Intro:
- I repair mainly vintage audio equipment from the 1960’s/70’s 8 80’s. I specialize in 2 channel HiFi audio equipment.
- Instructions:
- My idea is a grumpy monkey sitting at a work bench or table (he must clearly be grumpy) and he’s using either a soldering iron or a multimeter working on a Marantz 2250b (I’ll include photo of receiver) then on each side I’d like Cerwin Vega AT-15’s angling out 30ish degrees (will include photo of these too) and possibly an oscilloscope behind the monkey like over his shoulder on a shelf. Feel free to add other components like a lamp to light up the work area, screw driver, needle nose pliers, solder station, roll of solder wire, etc to help fill in the space. NOTE TO ALL: the name is “Grumpy Monkey Audio” and then subtext “Vintage HiFi Service & Repair” I can’t update that part of this project so I have to say it here. Everyone who’s submissions were good has and will be told this directly too in case you submit before seeing that.
- The AT-15’s are the wood grain ones. You can create them as wood grain or “black wood grain” either is fine.
- Some examples I found of grumpy/angry monkey faces. I do want it to be drawn/cartoon not look like a real image. Idk. Maybe like cartoony and grumpy…
- Included a better photo of what the big speaker (woofer) in the Cerwin Vega needs to look like.. black rim where screw holes are, red surround aka foam, then black cone. Critical detail to get right. Also included pics of contact cleaner as reference for things to add to work bench or shelf.
- Examples of Oscilliscope
- These are the two lamp style I use. The logo doesn’t HAVE to include one but if needed here’s a reference. Can be one or both.
- My current work bench for reference.
Open design concept stage had ended with 230 submissions from 43 designers. Go to DESIGNS tab to view all submissions.